Commercial Hydraulic Pump Part No 3227567031 - assembled

The Commercial hydraulic pump (part number 3227567031) was assembled using the following components:-

commercial hydraulic pump 3227567031 components
components used

3225123202 shaft end cover
3223110100 port end cover
3228117100 gear housing
3222917250 gear set
3913784028 washer
3911401089 stud
3912883052 seal
3912884052 seal
3912082062 dowel
Commercial hydraulic pump test
pump bolted on test rig

 3911432004 drive screw
3912185055 thrust plate
3912883176 seal
3912883177 seal

The finished pump was tested on our test rig, at 1200 RPM, anticlockwise rotation.

The pump was sprayed, as per our customer's instructions.


Commercial hydraulic pump
Finished pump
P&R Hydraulics Ltd is an official distributor for Parker Hannifin and can supply the above pump as an assembled unit or the individual components.

Please contact our Service Department for further details - tel 01603 424880.


 





Commercial Gear Pump/Motor build programme (P330 model shown)


Commercial Gear Pump/Motor build programme (P330 model shown)
Originally uploaded by P&R Hydraulics

Commercial gear pump and motor components supplied by hydraulic specialists P & R Hydraulics Ltd - www.pandrhydraulics.com. Components shown are shaft end cover, port end cover, gear housing, gear set, seal kit, thrust plates, shaft bearing and assembly bolts. All items can be supplied individually or as an assembled pump or motor.

We can supply single pumps and motors, tandem pumps, triple pumps and quad pumps. Also we can do custom builds, build to existing specifications or repair an original unit.

Commercial is also referred to as Commercial Hydraulics and Commercial Intertech.

(P330 model shown in photo)

COMMERCIAL HYDRAULIC MOTOR REPAIR

HYDRAULIC MOTOR REPAIR
PART No: 3139710137


Commercial hydraulic motor repairThe hydraulic motor was dismantled, cleaned
and inspected.  Shaft and seals were worn,
and the housing was damaged.  The
hydraulic motor was re-assembled using new
parts where necessary, as listed below:-

3912884021  Square section seal
3910381059  Bearing
Commercial hydraulic motor repair3912585022  Ring seal
3912686065  Snap ring
3912883115  Lip seal
3912185062  Thrust plate
3912882051  Pocket seal strip
3132525251  Gear shaft set
3138225100  Gear housing
3911432004  Drive screws

The hydraulic motor was tested on our in-house test rig.


P&R Hydraulics Ltd is an official distributor for Parker Hannifin (formerly known as Commercial Intertech) and can supply all of the above parts individually.

Please contact our Service Department for further details - tel 01603 424880





Sauer Danfoss PVG32 Valve

Sauer Danfoss PVG32 Valve


Sauer Danfoss PVG32 valve built in P&R Hydraulics' workshop, to customer's specifications.  The valve was tested on our in-house test rig and the relief valves were set.  (The image is of the partly assembled valve.)

The following parts were used in the assembly:-

157B5111  Inlet Section
157B3171  Lever assembly
157B2001  Anti Cavitation Valve
157B6233  Worksection
157B2050  Shock valve
157B2210  Shock valve
157B7021  Spool
157B7020  Spool
157B7022  Spool
157B4735  Actuator
157B4734  Actuator
157B4034  Actuator
157B2015  Cover Plate
157B8003  Assembly kit

P&R Hydraulics Ltd is an official Sauer Danfoss distributor and can supply all of the mentioned parts, either individually or as an assembled PVG32.  We can also assemble and supply PVG100 and PVG120 valves.  Please contact us for further details.