LAMMA 2016

Join P & R at Lamma 2016

Being held as usual at the East of England Showground, Peterborough, on Wednesday 20 – Thursday 21 January 2016, the 2016 show promises to be the biggest and best yet!

As ever, P & R Hydraulics will be in attendance and you can find us in Hall 4, stand 498. Why not pop over, say hello and put faces to names?

Our Technical Director Justin Gill will be there with Colin Filby, Internal Sales Engineer. This will be Colin’s first time at LAMMA, so he’s genuinely looking forward to meeting people and putting faces to names of existing contacts of his. Additionally, James Roberts, Technical Sales Manager at Hy-Pro will be there to discuss their products and help us with technical enquiries.

It’s likely we will be focussing on products from Danfoss, Turolla and Hy-Pro; we will also be showing the new Webtec VFD190 flow-control valve.

Merry Christmas

Xmas 2015 Opening Hours


The P & R Hydraulics workshop and office will remain open as close to Christmas itself as possible. We do, however, need a break and so both our workshop and office will be shut during these times:
  • Finish Wednesday 23 December 2015 at 5pm
  • There will be a skeleton staff on Thursday 24 December 2015 until noon
  • Back on Monday 4 January 2016 8.00 am
If you have any queries, please don’t hesitate to get in touch with our technical team.

In the meantime, we wish you and yours a very Merry Christmas and a Happy New Year!

Danfoss PVG120/32 valve

A Danfoss PVG120/32 combination valve was built in our workshop to our customer's specifications, using the parts listed below:-

155G3050   Lever assembly
155G4022   Cover - PVG120
155G5020   Inlet section
155G6014   Worksection
155G6080    Relief valve
155G6456   Spool
155G7033   Inter module
155G7043   End cover
155G8041   Assembly kit PVG120/32
155L7504    Spool spring
157B0001   Spool end cover
157B0008   Spool end cover
157B2000    End Cover
157B3171    Mechanical actuator
157B6203   Worksection
157B7022   Spool
157B7023    Spool
157B7121   Spool
157B8006   Assembly kit

P & R Hydraulics Ltd is an official Danfoss sales partner and can supply all of the mentioned parts, either individually or as an assembled valve. We can also assemble and supply Danfoss PVG16, PVG32, PVG100 and PVG120 valves. Please contact us for further details - tel 01603 424880.

The load-sensing PVG120 is a combined directional and flow control valve made for high flow, high pressure demands. The valve is suitable for mining and drilling rigs, forest attachments, marine applications like winches and bow thruster.


Danfoss PVG120/32 combination valve
Danfoss PVG120/32 combination valve

Parker Commercial D Line Valve Block repair

Parker Commercial D Line Valve Block repair
Spools (pitted)
A customer brought in a Parker Commercial D Line 8 section valve block, off a rig mounted offshore crane, for repair.

The valve block was dismantled, all parts cleaned and inspected. The spools were found to be pitted and the mounting lug on the outlet cover was damaged. The customer wanted only genuine Parker Commercial parts to be used for the repair. So our engineer ordered worksections (spools), relief valves and outlet cover from USA on a 14 week lead time (unfortunately these parts are not available in the UK).

The customer needed a quick fix on the valve block until the genuine parts were received. So our engineer resealed, reassembled and tested it before returning to the customer.

Please contact us on 01603 424880 for more information on our repairs.

Parker Commercial D Line Valve Block repair
Valve block being tested.

Coloured cable ties

Ingenious use for coloured cable ties!

A 10 bank spool valve was brought into our workshop for inspection. Prior to removing the valve coloured cable ties were fitted to all inlets and outlets of the valve and machinery. The colour cable ties will greatly assist with the refitting of the valve.

10 bank spool valve

P & R Hydraulics offers a full product repair service. Our on-site workshop and maintenance facility includes a test rig which allows our experienced team to rapidly diagnose any product faults and failures.

Our experienced team is able to:
  • inspect, repair and test hydraulic motors, pumps and valves 
  • modify existing units to suit customer requirements 
  • custom build hydraulic pumps, motors and directional control valves, both manual and proportional, using products from Danfoss (Sauer Danfoss) , Parker Hannifin (Commercial and Kontak) and Hy-Pro. 

Upon return, all repaired and serviced units leave the premises tested and ready for customer use. New products can be supplied if the original unit cannot be repaired.

Please contact us for more information – telephone +44 (0) 1603 424880.

Hy-Pro V5 Spool Valve - Marinised

Today in our workshop we have assembled a Hy-Pro V5 Spool Valve using a marinised worksection, making it corrosion resistant and suitable for maritime applications.

The V5 spool valve was assembled using the following components:-

V5-R140-T4 - Inlet
V5-T40 - Outlet
V5-80 - Bolt Kit
V5-HO - Rotary lever
V5-O - Friction Detent Kit
V5-DCXM - Worksection (marinised)

P&R Hydraulics is an authorised distributor for Hy-Pro (Hydraulic Projects). We can supply assembled units or individual components. Please contact our sale team on 01603 424880 for more information.

Hy-Pro V5 spool valve (rotary lever)
Hy-Pro V5 spool valve

Hy-Pro V5 Spool Valve Assembly

Our engineer built a Hy-Pro V5 spool valve (single section) to suit our customer's specifications, using the following parts:-

V5-140-T4  Inlet
V5-ACX     Worksection
V5-H           Lever Kit
V5-T40       Outlet
V5-80         Assembly bolts
F Kit           Float Kit 

The assembled V5 spool valve was checked for operation.

P & R Hydraulics is an official distributor for Hy-Pro (Hydraulic Projects Ltd) and can supply assembled units or individual components.  Please contact our sales team on tel: 01603 424880 for more information.

Hy-Pro V5 Spool Valve
Hy-Pro V5 Spool Valve (image shows a 5 section unit)

Danfoss OMSW 200 Hydraulic Motor inspection - model 151F5065-2

Danfoss 151F5065 OMSW 200 hydraulic motor repair
Internal Part (worn)
A Danfoss OMSW 200 hydraulic motor (model 151F5065-2) was brought to us for inspection.  Our engineer dismantled the unit and cleaned all the parts.  The internal parts were found to be badly worn.  This was communicated to our customer, who instructed for the unit to be resealed only.  The hydraulic motor was resealed, reassembled and tested.

For more information on our repair service please contact us on 01603 424880.

Spool Valve with rotary lever - Hy-Pro

A customer needed a Hy-Pro V5 spool valve with a rotary lever and as it is for a maritime application it has been assembled using a marinised worksection (corrosion resistant).

The Hy-Pro V5 rotary lever has been developed to enable the operator precise control of motors and cylinders.  The lever swings through an 130° arc and works by means of a scroll which converts the rotary action of the lever into axial movement of the spool.  The centring mechanism has a friction detent feature which positively holds the spool in neutral then maintains the selected position.

Application

Used extensively in the forestry and fishing industry to control the speed of conveyors and winches.

Features

  • 130° movement
  • Compact design
  • Spool options
  • Detent in neutral
  • Friction hold
  • Robust mechanism
  • Toughened components
  • Cast iron body and scroll

 
Short video showing the V5 rotary lever in action

P & R Hydraulics is an official distributor for Hy-Pro (Hydraulic Projects Ltd) and can supply assembled units or individual components.  Please contact our sales team on tel: 01603 424880 for more information.

Danfoss OMT FX Hydraulic Motor Reseal - model No 151B3228-2

A Danfoss OMT FX hydraulic motor and brake assembly (model number 151B3228-2) was brought to our workshop for repair.  Our engineer dismantled the unit and cleaned all parts.  The gear wheel was severely worn, the output shaft was worn at the seal and the seals were stiff.  These findings were communicated to our customer, who instructed for the unit to be resealed only.  The unit was resealed, reassembled and tested.

For more information on our repair service please contact us on 01603 424880.

Gearwheel (Danfoss Power Solutions) Repair OMT FX hydraulic motor and brake
Gearwheel (severely worn)

Case Maxi Sneaker (Series C) hydraulic repair

Our on-site hydraulic engineer was called out to identify the hydraulic problem on a Case Maxi Sneaker (Series C).  The motor spool valve relief valve setting was checked and reset.  The engineer then performed a complete hydraulic oil change and fitted a new hydraulic motor and hydraulic filter.

The machine was checked for leaks and operation and our engineer left the site once satisfied that everything worked OK.

Please contact us for more information on our on-site service on tel: 01603 424880 or mail@pandrhydraulics.com.

Case Maxi Sneaker (Series C) hydraulic repair
Case Maxi Sneaker (Series C)

Hydraulic brake hub inspection

An unidentified unit was brought into our workshop for an inspection and test.  The unit was dismantled, all parts cleaned and inspected for wear.  Our experienced hydraulic engineer identified the unit and quoted our customer for repair using OEM parts or cheaper alternatives.  The hydraulic brake hub was repaired and tested on our in-house test rig.

Brevini FL635.10 hydraulic
hydraulic brake hub 

Please contact us for more information on our repair service on tel 01603 424880 or mail@pandrhydraulics.com.


Poclain hydraulic brake/motor (MSE02) inspection

A Poclain hydraulic brake/motor (model number MSE02) was brought into our workshop for inspection.  The unit was dismantled and all parts inspected.  The internal parts were badly damaged which indicated the unit had been run dry.  Unfortunately the unit was considered beyond economical repair.

Poclain MSE02 hydraulic brake/motor repair
image of damage to internal parts
Poclain MSE02 hydraulic brake/motor repair
image of damage to internal parts











Not only can we inspect and repair units, but we sell new products at very competitive prices backed by the manufacturer's waranty.  Even if we do not stock a certain item we will endeavour to source it for our customer.  For more information on our services and products please contact us on tel 01603 424880 or mail@pandrhydraulics.com.


Hy-Pro Directional Valve - V5-60

A customer ordered a Hy-Pro V5 single section valve to be built to his own specifications.  Our engineer built the V5 single section valve using the following parts:-

V5-T4E      Inlet cover
V5-DE24   Worksection
V5-H          Lever Assembly
V5-T4PE   Outlet Cover (PCO)
V5-80         Bolt Set

P & R Hydraulics is a recently appointed Hy-Pro distributor.  We can supply assembled units, separate components and build units to your own specifications.  Please contact us for more information - tel 01603 424880.
 

Hy-Pro Directional Valve - V5-60
V5 single section valve

Danfoss PVG32/4 valve assembly inspection

A Danfoss PVG32/4 valve assembly was brought to our workshop for inspection.  The valve was dismantled, all parts cleaned and inspected for wear.  The internal parts were badly worn and the valve was beyond economical repair.

Danfoss PVG32/4 valve inspection
Image showing badly worn internal parts of Danfoss PVG32/4 valve
P & R Hydraulics is an official sales partner for Danfoss Power Solutions and we can supply their products at competitive prices, covered by their manufacturer's waranty.  We have the ability to assemble all Danfoss PVG valves in our in-house workshop (PVG16, PVG32, PVG100 and PVG120).  Please contact us for more details on tel: 01603 424880 or mail@pandrhydraulics.com.